Keysight E6610A, User And Programming Manual

Page: 24 / 108

7 Setting up Measurements
The E6610A GUI software has been designed to search and list all E6610A
instruments on the same network subnet. You can use this search function, or
manually provide the host name or IP address to identify the instrument for
connection.
Using the Search Function
To search for E6610A instruments automatically, click the Search button.
A "search complete" message will appear when the software is done, and a list
of discovered instruments will appear in the box to the right of the Search but-
ton. Use the drop-down arrow to see the complete list.
Select the desired instrument and click the Connect button. You will see a mes-
sage when the connection is done, and the connection status displayed in the
bar at the bottom of the GUI window will change from "Disconnected" to "Con-
nected."
Manual Entry of Host Name or IP Address
To use the host name, type the serial number of the E6610A (e.g. KR56180110)
into the box to the right of the Search button.
To use the IP address, type the IP address of the E6610A (e.g. 10.122.34.151)
into the box to the right of the Search button.
If you do not know the IP address of the E6610A, follow these steps to
find the address.
1.
Go to the PC's Start menu and run cmd.exe to open a command line
inter-face window.
24 Keysight E6610A User and Programming Guide