13
V2802A Option M81
Hardware Lock-link Setup for a Three Instrument Stack
Hardware Lock-link Setup for a Three Instrument Stack
(Not needed if equipment is being installed in a system rack cabinet)
Stacking the Distribution Unit Using Two PXI Chassis
The Lock-link material provided will be used in these instructions to mechanically
secure the Distribution Unit to two M9018A PXI chassis.
1. The lock-link kit materials needed:
•
0515-0372 - Screw T10 M3x0.5, 8 mm (x6), for Struts/Spacers
•
0515-0380 - Screw T20 M4x0.7, 10 mm (x16), for PXI Chassis
•
0515-0436 - Screw T20 M4x0.7, 18 mm (x4), for Dist. Unit
•
V2800-00007 – Lock-link, Struts (x4)
•
V2800-20012 - Lock-link, Front Spacer (x2)
•
V2800-20013 - Lock-link, Rear Spacer (x2)
The lock-link struts and spacers have already been assembled for your convenience
using the 0515-0372 M3 screws, as shown in
. The top of each strut has also
been labeled to aid in the correct location.
Figure 4
Lock-Link Strut and Spacer Assemblies
