14
V2802A Option M81
Hardware Lock-link Setup for a Three Instrument Stack
2. Remove the two rear feet from the bottom of the Distribution Unit.
3. Place the Distribution Unit on top of the first PXI chassis.
4. Using a T20 Torx driver, attached the two struts labeled “L-TOP FRONT” and
“R-TOP FRONT” to the front side frame of the Distribution Unit using two screws
(0515-0436). Torque to 9 in-lb.
5. Align the holes in the bottom PXI Chassis with the Front Strut holes and install
two M4 10 mm screws (0515-0380) using a T20 Torx driver on both the left and
right Front sides. If may be necessary to loosen the two M3 screws (0515-0372),
Use a T10 Torx driver, on the Front Spacer so the strut can move more freely to
align the holes. Leave the screws slightly loose for now.
Figure 5
Attaching the Distribution Unit to the Lower PXI Chassis
