28
U9361C/F/G/M RCal Receiver Calibrator Measurement Guide
Demonstrations
Demo #2 – Magnitude Cal with Source Control, Multiple States
Compatible Signal Generators:
— N5173B EXG
— N5183B MXG
— N519xA (all UXG)
This demonstration shows how changing measurement parameters after a calibration may require
adding additional Cal states. A signal generator and a signal analyzer connected through USB is
required for source control. This demo calibrates for a 3 dB attenuator. For signal generator control,
“Setting Up a Signal Analyzer to Control a Signal Generator” on page 21
.
On the Signal Analyzer:
1.
Select
Mode
>
Spectrum Analyzer
>
Mode Preset
to set the signal analyzer to a known state.
2.
Select
FREQ
>
Start Freq
>
24 GHz
3.
Stop Freq
>
25 GHz