30
U9361C/F/G/M RCal Receiver Calibrator Measurement Guide
Demonstrations
7.
Connect the RF output of the signal generator to the RF Input of the signal analyzer.
8.
Select
Meas Setup
>
Source
>
RF Output
>
On
to enable the RF output of the signal generator.
9.
Select
Trace
>
Select Trace
>
Trace 1
, set
Trace Type
>
Max Hold
, and set
View
>
Active
.
10.
Once the trace has stabilized, save it for comparison by setting
View
>
View
.
11.
Disable the RF output on the signal generator from
Meas Setup
>
Source
>
RF Output
>
Off
.
12.
Disconnect the cable from the signal generator and connect it to the RCal module.
