U3047AM08
Safety and Regulatory Information
Before Applying Power
Verify that the premises electrical supply is within the range of the instrument.
The instrument has an autoranging power supply.
If this product is not used as specified, the protection provided by the
equipment could be impaired. This product must be used in a normal
condition (in which all means for protection are intact) only.
The Mains wiring and connectors shall be compatible with the connector
used in the premise electrical system. Failure, to ensure adequate earth
grounding by not using the correct components may cause product
damage, and serious injury.
This product is designed for use in Installation Category II and Pollution
Degree 2.
Verify that the premise electrical voltage supply is within the range
specified on the instrument.
When installing the product in a cabinet, the convection into and out of
the product must not be restricted. The ambient temperature (outside
the cabinet) must be less than the maximum operating temperature of
the product by 4 °C for every 100 watts dissipated in the cabinet. If the
total power dissipated in the cabinet is greater than 800 watts, then
forced convection must be used.
This instrument has auto-ranging line voltage input, be sure the supply
voltage is within the specified range and voltage fluctuations do not to
exceed 10 percent of the nominal supply voltage.
Keysight U3047AM08 User's and Service Guide
85
