Keysight Technologies N9322C, User Manual

Page: 34 / 214

Getting Started
Helpful Tips
26
Press
{IP Address Static}
to manually set the IP address,
gateway and subnet mask with the proper LAN information,
or just press
{IP Address DCHP}
to set the IP address in LAN
dynamically according DCHP.
Press
{Apply}
to enable the LAN connection according to the
IP configuration you set.
GPIB
Press
[System] > {More} > {Port Setting} > {GPIB Address}
to set
the GPIB address for the analyzer. This softkey is only vaild
after the option G01 is installed.
Timed Power On/Off
Pressing
[System] > {Power On/Off Preset} > {Timed Pwr On}
or
{Timed Pwr Off}
sets the time switch to power on/off the
N9322C in a user- defined time and date. This function
requires the power supply connected.
Press
{Repeat Mode Once/Everyday}
to set the N9322C boot
up/off in the pre- saved time everyday. The pre- saved date is
invalid in this mode.
Power Preset Last
Press
[System] > {Pwr On/Preset} > {Power On Last}
to activate
this function. For the standard N9322C, this operation only
save the last state if the analyzer is turned off by the front
panel power switch.