Keysight Technologies N4917BSCB 400G, User Manual

Page: 80 / 104

80 Keysight N4917BSCB 400G Optical Receiver Test Application User Guide
5 Performing Stressed Receiver Compliance Tests with N4917BSCB Software
Stress signal parameters
• Periodic Jitter Frequency
• Periodic Jitter Amplitude
• Sinusoidal Interferer Frequency
• Sinusoidal Interferer to Noise Ratio
• Ceq target value (applicable only for IEEE 802.3cd-based flavors)
• ISI generation method
Procedure Refer to “Automated Calibration” on page 42.
Results Pass/Fail
Recall stressed eye signal from last calibration settings
Overview This task recalls and applies the latest stressed eye calibration settings.
Connection Diagram Connect the instruments as shown in “Setting Up and Preparing the
Compliance Test Setup” on page 68.
ID
Type Test ID
200GBASE FR4 1004
200GBASE LR4 2004
200GBASE DR4 3004
400GBASE FR8 4004
400GBASE LR8 5004
400GBASE DR4 6004
400G-FR4 7004
100G-FR 14004
100G-LR 15004
100GBASE-DR 8000
50G-SR/100G-SR2/200G-SR4/400G-SR8 9004
50G FR 12004
50G LR 13004