Keysight Technologies N432A, User Manual

Page: 127 / 154

Maintenance 3
N432A User’s Guide 105
Error list
–
101
Invalid character
An invalid character was found in the command string. You may have inserted a
character such as #, $, or % in the command header or within a parameter.
Example: LIM:LOW O#
–
102
Syntax error
Invalid syntax was found in the command string
Example: LIM:CLE:AUTO, 1 or LIM:CLE: AUTO 1
–
103
Invalid separator
An invalid separator was found in the command string. You may have used a comma
instead of a colon, semicolon, or blank space; or you may have used a blank space
instead of a comma.
Example: OUTP:ROSC,1
–
105
GET not allowed
A Group Execute Trigger (GET) is not allowed within a command string
–
108
Parameter not allowed
More parameters were received than expected for the command. You may have entered
an extra parameter, or added a parameter to a command that does not accept a
parameter.
Example: CAL 10
–
109
Missing parameter
Fewer parameters were received than expected for the command. You may have omitted
one or more parameters that are required for this command.
Example: AVER:COUN:VOLT
–
112
Program mnemonic too long
A command header was received which contained more than the maximum 12
characters allowed
Example: SENSeAVERageCOUNtVOLTage AVC8