IEEE 802.3 NRZ Compliance Test Application Getting Started
87
Installing N1091..CA on the oscilloscope
4
Installing the N1091..CA Series IEEE 802.3 NRZ Compliance Test Application
Follow the steps below to install the N1091..CA Series IEEE 802.3 NRZ Compliance Test Application
and its license as well as the license for the 86100DU-401. When the license for 86100DU-401 is
installed, the 86100DU-401 software is enabled.
1 Go to www.keysight.com and search for and download the compliance application. Install the
application on the specific 86100D for which you redeemed the license.
2 Save the license file that you received from Keysight in a folder on the local disk or in an
accessible memory device.
3 If not already done, purchase an 86100DU-401 or F-AEYE license. Save the license file that you
received from Keysight in a folder on the local disk or in an accessible memory device.
4 If the FlexDCA software is running on the Oscilloscope, close FlexDCA.
5 From the Windows
Start
menu, click
All Programs>Keysight License Manager
to launch the Keysight
License Manager.
Figure 86
Launching Keysight Connection Expert from the Start menu
NOTE
When you redeem an IEEE 802.3 NRZ Test App license, you must select whether to install the
application on the Oscilloscope or a specific PC.
NOTE
Keysight License Manager version 5.1 (and higher) have a different user interface than version
5.0 (or earlier). Even though the path to launch the Keysight License Manager is the same for
both versions, refer to the
Keysight License Manager Online Help
for the respective versions to
find more information about the functionality of the application.
