3
Installing N1091..CA on a PC Without N1010A FlexDCA
60
IEEE 802.3 NRZ Compliance Test Application Getting Started
Connecting the Equipment
1 For a DCA-X oscilloscope, install one of the module combinations listed in
into the
86100D or N1000A.
Table 5
Module combinations for DCA-X Oscilloscope
2 For a DCA-M oscilloscope, keep in mind the information in the following table.
Table 6
Supported configurations for DCA-M Oscilloscope
3 Connect the equipment as shown in the connection diagrams above and power on all of the
instruments.
Installed Module Configurations
Single Plug-In Module
Setup
Multiple Plug-In
Module Setup
Description
86108A/B
N1060A
Available
The 86108B can have either options LBW or
HBW plus 216 or 232.
86112A, 54754A, 86117A, or 86118A-H01
86107A (any option)
N4877A, N1076 A/B, N1077A, N1078A Clock Data
Recovery Options 216/232
*
N1045A, N1045B, and N1055A, N1046A 75/85/100
GHz
Available
Option 216 provides a maximum data rate of 16
Gb/s. Option 232 provides a maximum data rate
of 32 Gb/s.
* If you have access to the clock for the device, you can connect the clock to the 86100D’s or N1000A
Trigger
input
instead
of using the CDR.
Configurations for DCA-M
Requires N107x
N1094A
√
(N107xA-232)
N1094B
√
(N107xA-232)
N1092 C/E
√
(N107xA-232)
