IEEE 802.3 NRZ Compliance Test Application Getting Started
75
Installing N1091..CA on a PC Without N1010A FlexDCA
3
Starting the N1091..CA Series IEEE 802.3 NRZ Compliance Test Application
After you install the N1091..CA Series IEEE 802.3 NRZ Compliance Test Application on a PC without
the N1010A FlexDCA interface, follow the steps below to start the N1091..CA Series IEEE 802.3 NRZ
Compliance Test Application:
1 Ensure that the 86100D or N1000A Oscilloscope is added to the Keysight Connection Expert and
that the connection is active. Refer to
“Adding 86100D or N1000A to Keysight Connection
2 From the Windows
Start
menu, navigate to
Start>All Programs>Keysight FlexDCA Applications>802.3
Test App
and click
Launch 802.3 Test App
.
3 The IEEE 802.3 NRZ Test Application banner appears followed by the
Connect to FlexDCA
dialog.
Figure 78
Connect to FlexDCA dialog
4 Enter the SICL address or VISA alias, if known, else select the
Select from Keysight Connection Expert
option to find the SICL Address/VISA alias.
5 Click
OK
to connect.
• The default view of the IEEE 802.3 NRZ Test Application appears.
