3
Installing N1091..CA on a PC Without N1010A FlexDCA
66
IEEE 802.3 NRZ Compliance Test Application Getting Started
Adding 86100D or N1000A to Keysight Connection Expert
Most of the measurements in the IEEE 802.3 NRZ Test Application use a supported DCA-X or DCA-M
sampling oscilloscope.
Note that the Keysight I/O Library Suite must be installed before you proceed with connecting to the
network analyzer. The user interface for Keysight Connection Expert 2017 (Version 18.0) and higher
is slightly different from its previous versions, such as Version 17.2 or earlier.
Connection using Keysight Connection Expert v17.2 (or earlier)
1 On the 86100D Oscilloscope, launch the Keysight FlexDCA application.
2 From the FlexDCA’s main menu, click
Help
>
About FlexDCA...
. The
About 86100D
dialog box
appears.
3 In the
System Information
area, scroll down to view the
Computer Name
entry.
Alternatively, you can obtain the computer name from the Windows
System
properties.
Figure 66
86100D Oscilloscope’s hostname
4 Record the Computer Name (corresponds to hostname) as you will need this name later in this
procedure.
NOTE
This section lists the steps for 86100D DCA-X oscilloscope. Perform similar steps for the
N1000A DCA-X oscilloscope.
