Keysight Technologies N1091 CA Series, Getting Started

Page: 19 / 96

IEEE 802.3 NRZ Compliance Test Application Getting Started 19
Introduction 1
Starting the N1091..CA Series IEEE 802.3 NRZ Compliance Test Application
After you install the N1091..CA Series IEEE 802.3 NRZ Compliance Test Application on a PC (with or
without the N1010A FlexDCA interface) or on the N1000A or 86100D Oscilloscope, refer to the
following sections to start the N1091..CA Series IEEE 802.3 NRZ Compliance Test Application:
• If the N1091..CA Series IEEE 802.3 NRZ Compliance Test Application and the N1010A FlexDCA
Software are installed on the same PC and the DCA-X or DCA-M Oscilloscope is being accessed
remotely, see “Starting the N1091..CA Series IEEE 802.3 NRZ Compliance Test Application” on
page 50.
• If the N1091..CA Series IEEE 802.3 NRZ Compliance Test Application is installed on a PC (but the
N1010A FlexDCA Software is not installed) and the DCA-X or DCA-M Oscilloscope is being
accessed remotely, see “Starting the N1091..CA Series IEEE 802.3 NRZ Compliance Test
Application” on page 75.
• If the N1091..CA Series IEEE 802.3 NRZ Compliance Test Application is installed on the N1000A
or 86100D Oscilloscope, see “Starting the IEEE 802.3 NRZ Test App-Series Compliance Test
Application” on page 92.