3
Installing N1091..CA on a PC Without N1010A FlexDCA
68
IEEE 802.3 NRZ Compliance Test Application Getting Started
9 In the
Add a LAN device
pane,
a
Under
Set LAN Address:
, enter the Hostname (recorded in step 1) in the
Hostname or IP Address:
field. Note that your Hostname entry will be different from what is shown in the image.
b
Under
Set Protocol:
, select
Socket
and enter the port number.
c
Under
Verify Connection:
, click
Test This VISA Address
to verify the connection.
Figure 70
Adding the 86100D device information in the Keysight Connection Expert
10 Once you verify the entered data, click
Accept
to complete the process.
