User Manual
COGE5, COGE5-F
page 55 of 110
© KEYMILE December 2015
EN/LZTBU 372 144/3 RA
110
Commissioning
5. Add the VLAN 101:
-
Click the “Create” button.
-
The “Create a new VLAN” dialogue opens.
6. Enter the VLAN parameters:
-
VLAN ID = 101.
-
Name = VLAN_101.
-
Click the “OK” button.
7. Execute “Apply”.
Result:
The VLANs for the bridge-1 are completely configured.
Activation
Proceed as follows:
1. Select the “Tree View” of the ECST.
2. Navigate to the port parameters:
-
AP:/unit-x/port-5, Main - General:
3. Set the administrative state of the port-5 to up
-
Interface Status, Admin Status = Up.
4. Execute “Apply”.
-
The “Operational Status” changes to “Up”.
Result:
The port is activated.
Save the configuration
Proceed as follows:
1. Save the configuration to the NE flash memory:
-
Execute “Save to NE”.
Result:
The configuration is saved.
End of instruction
