User Manual
COGE5, COGE5-F
page 103 of 110
© KEYMILE December 2015
EN/LZTBU 372 144/3 RA
110
User Interface Reference
Please note:
For an overview on the specific characteristics of XMC20 Switch ports,
please refer to
[356] User Manual “Ethernet Switching”
Table 36:
AP: / unit-x / iports / iport-b, Main – Physical
Operation Name
Parameter Name Range
Descriptions / Details
MAC Address
00:00:00:00:00:00 …
ff:ff:ff:ff:ff:ff
Shows the physical (MAC) address of this port.
This parameter is read-only.
Port Speed
1’000 Mbit/s
Shows the port speed.
This parameter is read-only.
10’000 Mbit/s
---
The internal Ethernet port is not operational.
MTU
1978 … 9’194 Octets
Maximum Transmission Unit, i.e. maximum IP
packet size.
The MTU size is calculated including the IP
headers.
Speed And Duplex
Admin
1000BaseX FD
1’000 Mbit/s, full duplex.
Applicable for iport-1 to iport-21.
10GBaseX FD
10’000 Mbit/s, full duplex.
Applicable for iport-51 and iport-53.
Auto
Not applicable
Operational
1000BaseT FD
1’000 Mbit/s, full duplex.
Applicable for iport-1 to iport-21.
10GBaseX FD
10’000 Mbit/s, full duplex.
Applicable for iport-51 and iport-53.
---
The internal Ethernet port is not operational.
Flow Control
Admin
Port Ethernet flow control according to IEEE
802.3x.
Flow control is a mechanism which allows the
receiving party of a connection to control the rate
of the sending party.
Operational
