Kettler 07988-727 Manual Download Page 5

Page: 5 / 68

Handling the equipment

ATTENTION!

It is not recommended to use or store the ap-

paratus in a damp room as this may cause it to rust. Please
ensure that no part of the machine comes in contact with li-
quids (drinks, perspiration etc.). This may cause corrosion.

■

Before using the equipment for exercise, check carefully to en-
sure that it has been correctly assembled.

■

Before beginning your first training session, familiarize yours-
elf thoroughly with all the functions and settings of the unit.

■

A slight production of noise at the bearing of the centrifugal
mass is due to the construction and has no negative effect
upon operation. Possibly occurring noise during reverse pe-
dalling result from engineering and are absolutely safe.

■

The exercise cycle has a magnetic brake system.

■

To operate correctly, the pulse function requires a minimum
voltage of 2,7 volts (only for computers working with batte-
ries).

■

The equipment is dependent of revolutions per minute.

■

Before use, always check all screws and plug-in connections
as well as respective safety devices fit correctly.

■

Always wear suitable shoes when using.

■

For a comfortable training position please adjust the hand-
lebar andsaddle position to your body height.

■

Nobody may be in the moving range of a training person du-
ring training

Instructions for Assembly

RISK!

Ensure that your working area is free of possible sour-

ces of danger, for example don’t leave any tools lying aro-
und. Always dispose packaging material in such a way that
it may not cause any danger. There is always a risk of suffo-
cation if children play with plastic bags!

■

Ensure that you have received all the parts required (see
check list) and that they are undamaged. Should you have
any cause for complaint, please contact your KETTLER dealer.

■

Before assembling the equipment, study the drawings careful-
ly and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.

■

The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if
possible technically talented.

■

Please note that there is always a danger of injury when wor-
king with tools or doing manual work. Therefore please be ca-
reful when assembling this machine.

■

The fastening material required for each assembly step is sho-
wn in the diagram inset. Use the fastening material exactly as
instructed.

■

First, please screw all parts loosely together and make sure
they are properly positioned. Turn the self-locking nuts, first by
hand, until resistance is felt, continuing subsequently against
the resistance (security clamp) with an appropriate tool, ac-
cording to the indicated torque, until firm. Check all scr-
ew/bolt connections for firm fit according to the assembly
step. Attention: self-locking nuts which are loosened once
again will become unusable (destruction of clamping system)
and must be replaced with new ones.

■

For technical reasons, we reserve the right to carry out preli-
minary assembly work (e.g. addition of tubing plugs).

– EN –

Maintainance – Service – Spare Parts

■

Damaged components may endanger your safety or reduce
the lifetime of the equipment. For this reason, worn or dama-
ged parts should be replaced immediately and the equipment
taken out of use until this has been done. Use only original
KETTLER spare parts.

■

To ensure that the safety level is kept to the highest possible
standard, determined by its construction, this product should
be serviced regulary (once a year) by specialist retailers.

■

Please ensure that liquids or perspiration never enter the ma-
chine or the electronics.

Spare parts order

■

When ordering spare parts, always state the full article num-
ber, spare-partnumber, the quantity required and the S/N of
the product (see handling).

Example order:

Art. no. 07988-727 / spare-part no.

67001400 / 2 pieces / S/N ....................

Waste Disposal

KETTLER products are recyclable. At the end of its
useful life please dispose of this article correctly and
safely (local refuse sites).

KETTLER GB Ltd.

Kettler House, Merse Road