Kett LE-200C, Operating Manual, Page: 31 / 40

【 Operation Example 2 】 : To erase an undesired measurement number
(N = 4 in this example) after measurements have been completed.
In this case the data for "N = 0004, B = 01, 66.4
µ
m" is deleted but the
measurement number does not change. Therefore the actual number
of measurements is decreased by the number of times the delete
operation is performed.
B. INC (Block Increment)
The Block Increment function mode is used to move the block number
to the next or another desired block number and continue measurements
without obtaining the block results.
【
Operation Example
】
: Move (increment) the next block number from 1 to 5.
25
Key Operations Display
# FUNCTION KEY
# DELETE N=?
# DELETE N=4
# NF(FE)
Printout example
➞
Key Operations Display
# FUNCTION KEY
# B.INC B=01?
# B.INC B=?
# B>INC B=5?
# NF(FE)
• To move sequentially to the next block (from 1 to 2), skip pressing
the C and F.R 5 keys and immediately press the ENT key.