7. Using Function Modes
22
DATE
This function is used to print out the date. To print the date, press the
PRINTER ON/OFF key to turn the printer on (the asterisk mark (
＊
)
on the LCD panel is replaced by the sharp mark (#)).
If the printer is off, "PRINTER OFF" will appear in the display. If you
incorrectly input comment numerals, use the C (Clear) key to erase
them and then input them again.
【
Operation Example
】
: Input October 17, 1995 (Up to 8 digits can be input)
LOT (Lot number)
This function is used to print out lot numbers (numerical comments).
This function is used in the same way as the DATE function mode.
When lot numbers are changed during measurement all previous data
is erased from memory and the unit begins again from measurement
number 0001.
【
Operation Example
】
: Input 6513 (Up to 9 digits can be input)
Key Operations
Display
# FUNCTION KEY
# DATE ?
# DATE 95.10.17?
# FUNCTION KEY
# LOT?
# LOT 6513?
Key Operations
Display
***DATE95.10.17***
*** LOT 6513 ***
Printout example
➞
Printout example
➞
Summary of Contents for LE-200C
Page 1: ...Operation Manual Model LE 200C LH 200C LZ 200C Coating Thickness Testers ...
Page 2: ......
Page 39: ......
Page 40: ...0510 MA 0301 100 ...
