Kett LE-200C, Operating Manual

Page: 18 / 40

12
3
Turning on the Power Switch
The power is turned on by sliding the power switch on the
right side of the main unit upwards. The type of probe being
used and the calibration parameters last used are displayed
on the LCD panel.
4
Inserting Printer Paper
After removing the paper compartment cover, cut the edge of
the printer paper with a pair of scissors, etc., so that the paper
has a clean edge and then insert the edge fully into the printer
through the guide slot in the printer compartment.
Next press the PAPER FEED button to feed the paper out
through the printer.
If you wish to print out measurement data or the date, etc.,
turn on the printer by lightly pressing the PRINTER ON/OFF.
The asterisk mark ("
＊ ") in the LCD panel will switch to a
sharp mark ("#") to indicate that the printer is on and ready to
use.
【
Display Example
】
LZ-200C
＊
NF APPL. No = 2
(High -frequency format (NF), Calbration Position (2))
＊
FE APPL. No = 1
(Electromagnetic format (FE), Calbration Position (1))
Diagram 5