Pre-Installation
Install in accordance with all national and local electrical codes.
• Turn power OFF at circuit breaker or remove fuse. Damage to this product caused by wiring with power on
voids the warranty.
• Suitable for damp locations.
• Read all installation instructions and warnings before beginning installation process.
• Installation instructions may change without notice due to continuous improvements.
• Do not use product if it is damaged.
• Luminaires contain no user-serviceable parts.
• Do not connect product to any voltage or frequency supply other than an X96 controller.
• If placed in enclosure alongside other electrical components, take necessary precautions regarding
operating temperatures.
• Product is UL surface-mount listed and does not require a dedicated enclosure. Product can be recess-
mounted in an 11/16 in (17.5 mm) slot.
Note:
For recessed applications there needs to be distance from the end of the LS0 and physical barriers due
to thermal expansion. The distance should be 1/32 in (0.8 mm) per foot for high output or 1/64 in (0.4 mm) per
foot for long run and uniform lens.
• Suitable for installation in the storage area of a clothes closet.
Notes:
-
The X96 Ketra controller provides low-voltage power and communication to the LS0 luminaires. The X96
needs to be between the AC mains power source and the run of LS0 linear.
-
Mount such that the total cable length from the X96 controller to the last LS0 segment is no more than
50 ft (15.2 m). A total cable length of 50 ft (15.2 m) can be used in a system run.
-
Each X96 controller can support up to 15 ft (4.6 m) to 24 ft (7.3 m), depending on the style.
15 ft (4.6 m) for the high output style and 24 ft (7.3 m) for the long run style. For longer run lengths, use
additional X96 controllers.
-
Connect all product in a single run to the X96 controller. For more details, please refer to the installation
instructions for the X96 controller.
-
‘Star’ or parallel wiring installations are not supported (see diagrams on the following page).
5 |
LS0
INSTALLATION GUIDE
P/N 3662707 Rev A
© 2022 Lutron Electronics Co., Inc. All rights reserved.
Summary of Contents for LS0
Page 1: ...LS0 LOW VOLTAGE LINEAR Installation Guide Models CM LS0 Coming in Phase 2 HW LS0...
Page 14: ...LS0 LIN AIRE BASSE TENSION Guide d installation Mod les CM LS0 venir dans la phase 2 HW LS0...
Page 27: ...LS0 LINEAL DE BAJO VOLTAJE Gu a de instalaci n Modelos CM LS0 que viene en Fase 2 HW LS0...
