support.kesslercrane.com
Page 22 of 33
USER GUIDE
SETTING UP A MOVE
CINESHOOTER SYSTEM
TURNTABLE
Select TURNTABLE for continuous panning.
The speed can be adjusted by pressing Up or Down on the joystick at any time.
With the proper AUX axis selected, Press Left or Right on the joystick to start/stop panning.
*
*
The turntable has a limitation to the number of rotations. Running the turntable for an extended period of time
may cause turntable to eventually stop. Simply restart the move to continue desired motion.
SETTINGS
This section allows you to select and adjust the following options:
•
Operation Mode – Standalone, Master/Slave, WiFi settings, Quiet Mode settings.
•
Control Options – Inverts Controls depending on user preference.
•
Firmware Update – See “Updating Firmware” section.
•
Lash Compensation
*
– Set up a pre-move to remove any lash in the system due to a
change in direction.
*
Lash Compensation is a unique setting for each pan unit and is set from the factory if the controller and
pan motor are purchased together. If wanting to change these settings, please take note of the factory
setting to be able to reset it. The setting for all other motors should be set to zero.
2.
1.
