support.kesslercrane.com
Page 13 of 33
USER GUIDE
PULLEY INSTALLATION
To adjust pulley ratios, begin by removing the pulley installed on the Slide motor and pull
outward away from the motor.
To install the pulley, simply push the pulley onto the motor shaft while aligning the holes. Be
sure to hold the belt in place while installing.
ACCESSORY INSTALLATION
CINESHOOTER SYSTEM
1.
2.
Install the Small Pulley onto the Slider Motor.
The pre-installed belt (labled 110XL) on the Slider Motor is to be used in most
applications. However, if using the Small Pulley in conjunction with the Shuttle Pod, Shuttle
Pod Mini, Shuttle Dolly or Pocket Dolly v2.0 follow steps 5-6.
Place the smaller belt (labled 100XL) around the Small Pulley.
3.
4.
Mount the Slider Motor onto the Motor Mount utilizing the threaded holes nearest to the
pulley on the back side of the motor.
5.
