support.kesslercrane.com
Page 17 of 33
USER GUIDE
CONNECTING AN INTERVALOMETER
For time lapse or stop motion, connect a Camera Control Cable to the “Out” port on the
CineShooter Pan & Tilt Head to the proper port on your camera.
ACCESSORY INSTALLATION
CINESHOOTER SYSTEM
FIZ MOTOR AXIS
The Kesser FIZ Motor will allow you to program lens adjustments on either the Focus, Iris, or
Zoom rings on your cinema (or any lens with a standard .8 pitched gearing).
To mount a FIZ Motor, your camera must be built on 15mm rods for the motor to attach to. Slide
motor onto 15mm rod, orienting the motor so the gearing aligns with the desired gear ring (Fo-
cus, Iris, or Zoom) on your lens.
If the motor has trouble engaging with the gearing of your lens, you may either try mounting
your motor with the second 15mm rod hole on the motor, or you may flip the FIZ motor to the
opposite side of the motor mount. Adjust articulation until the lens and motor engage without
obstruction.
1.
Tighten down the FIZ Motor with the tightening nob so it is securely fastened to the 15mm rod.
2.
Connect FIZ adapter cable to CAT-5 cable, and the other end of the CAT-5 cable to one of the FIZ
ports on the CineShooter
3.
