support.kesslercrane.com
Page 12 of 33
USER GUIDE
SMALL PULLEY
PULLEY STORAGE PIN
LARGE PULLEY
ACCESSORY INSTALLATION
CINESHOOTER SYSTEM
SLIDE MOTOR AXIS
The most common pairing with the CineShooter Pan & Tilt Head, the Slide Motor axis allows
for programmed slider motion that provides push-ins, pull-outs, pedastals up and down (when
slider is mounted vertically), angled moves, parallel slides, and parallax movements.
PULLEY CONFIGURATION
Depending on your desired shot type, there are two different diameter pulleys provided with the
slide motor that can be arranged in diferent configurations to provide three different gear ratios
allowing for the adjustment of overall motor speed, operating volume, and torque.
Note:
The metal pin on the Slider Motor stores the extra pulley when not in uses.
ADDING AN ADDITIONAL AXIS
Currently, there are several motor axes available that can be installed in various combinations
with your CineShooter system:
• Slide Motor
• Pan/Turntable Motor
• Tilt Motor (for creative
shooting)
• FIZ Motor
POSSIBLE PULLEY CONFIGURATIONS
Slider
Motor
Standard Speed / Torque
Standard configuration for most
shooting conditions.
High Speed / Low Torque
*
Interview configuration,
or when noise is a concern.
Slider
Motor
Slider
Motor
Low Speed / High Torque
Vertical configuration, or for heavy
camera loads.
*High speed / low torque config is not compatible with Pocket Dolly, Shuttle Dolly, Shuttle Pod or Shuttle Pod Mini
