support.kesslercrane.com
Page 10 of 33
USER GUIDE
ACCESSORY INSTALLATION
CINESHOOTER SYSTEM
Screw in threaded rods into port end of CineShooter.
Screw in end plate to the newly installed rods using
the provided screws and 5/32 allen wrench.
Remove the L-Bracket from the Mini Kwik Release
Receiver located on the CineShooter.
Loosen the Mini Kwik Release Receiver located on
both the CineShooter head, and the end plate.
Take the H-Frame and slide into both Mini Kwik Release
Receivers. Adjust the height and tighten down.
Mount camera.
Note:
The center point for the H-Frame is slightly off-center to
allow for cameras with a wider profile. The side with the larger
hole on the horizontal plate should face outward, closer to the
side of the heavy duty support end plate.
1.
HEAVY DUTY SUPPORT MODULE
The Heavy Duty Support Module is designed to increase the max weight capacity from 15 lbs.
to 25 lbs.
2.
3.
4.
5.
