Kessel Aqualift F XL Duo, Installation And Operating Manual

Page: 43 / 168

43/168
2016/05
ASSEMBLY
Control unit KESSEL Aqualift F Comfort 400V
Custom settings for pumps
Power-up delay [s] 5 5 5 5 5 0…60 B
Sensor height [mm]
2
130 130 130 130 130 0…999 A
Start-up lock [s] 3 6 6 6 6 6 0…30 C
Sensing zone [mm] 1000 1000 1000 1000 1000 0…3000 B
ON1 level [mm] 350 350 350 350 350 0…999 A
ON2 level [mm] 4 400 400 400 400 400 0…999 A
OFF1 level [mm] 160 160 160 160 160 0…999 A
Alarm level [mm] 450 450 450 450 450 0…999 A
On delay [s] 1 1 1 1 1 1…10 B
Post run time [sec] 1
- 200l container 3 3 3 2 2 1…10 A
- 300l container 6 6 5 5 3 1…10 A
- 450l container 6 6 6 5 4 1…10 A
Pump mode
6
(Duo only) on on on on on off/on B
Max. run time [min]
7
240 240 240 240 240 40…640 B
Max run occur 8 20 20 20 20 20 5…30 B
Min. current [A] 1 1 1 1 1 0…5 A
Max. current [A] 10 4 6,3 10 14 0…5 A
LEP offset [mm] 9 0 0 0 0 0 0…30 B
Auto SDS [d] 7 7 7 7 7 0…14 B
1) A = Set, check B = Optional C = Changes to be carried out only by trained KESSEL personnel..
2) Immersion pipe (bottom immersion pipe -> bottom container)
3) Time that elapses before the second pump starts (Duo) as well as the time that elapses before a pump can restart.
4) Only in Duo version
5) Length of delay to switch-off caused by ventilation of the level detector immersion pipe.
6)
Describes the sequence in which the pumps switch on/off. It is possible to switch between alternating and set sequence.
7) Maximum run time of each pump. Observe pump types S1 and S3
8)
Maximum number of pump start-ups within 3 minutes. Error message (visual and acoustic) if exceeded.
9) Offset required to adjust the pressure created if a compressor is used to create air bubbles.
SPF1400 SPF1500 SPF3000 SPF4500 SPF5500 Adjustment Comment
1