7
Safety instructions
•
If there is a risk of slipping on sloping ground, the implement carrier must be secured by an escort
with a rod or a rope. The escort must be located above the vehicle at a sufficient distance from the
work tools! For the helper, it is recommended to wear crampons.
•
If possible, always drive across (horizontally) to the slope!
•
Only drive on rough and dry ground on steep slopes! Moisture and rain increase the risk of slipping
out and slipping.
•
On steep slopes, lattice wheels or sprockets must be used to prevent the tractors from slipping off.
•
In emergency situations, if, for example, the machine slips sideways in the slope, always release the
handles! You as an operator do not manage with their physical strength to prevent the cultivators on
slipping and are otherwise carried away.
3.2.6 Leaving the machine
•
When stopping the machine, close the fuel tap (if present)!
•
By using wheel chocks or, if necessary, by applying the parking brake, secure the machine from
rolling away when leaving the vehicle.
•
Secure the device against unauthorized use!
•
Switch off the engine and, if present, remove the ignition key or the spark plug connector!
•
Never leave the machine unattended while the engine is still in operation!
3.2.7 Coupling and uncoupling attachments
•
Attach and remove attachments only when the engine is off, and the PTO is off.
•
When replacing attachments and their parts, use suitable tools and Wear gloves.
•
When mounting and dismounting, bring the required support equipment into the respective
position and ensure sufficient stability.
•
Secure the rear-mounted tow tractor with an attachment to prevent it from rolling (parking brake,
wheel chocks).
•
When attaching attachments, there is a risk of injury (crushing). Special care is necessary.
•
Attach implements according to regulations and fix in the prescribed places.
3.2.8 Maintenance, cleaning and repair work
•
Do not carry out maintenance and cleaning work on the running engine!
•
Always remove the spark plug connector when working on the engine.
•
If guards and working tools are subject to wear, they must be checked regularly and replaced if
necessary.
•
Damaged cutting tools must be replaced.
•
When replacing cutting tools, use suitable tools and wear protective gloves.
