KERN PLJ-C, Operating Instruction

Page: 212 / 359

17 Data output RS 232 and USB
You can print weighing data automatically via the RS 232C interface or manually
pressing the
PRINT button via the interface according to the setting in the menu.
This data exchange is asynchronous using ASCII - Code.
The following conditions must be met to provide successful communication between
the weighing balance and the printer.
•
Use a suitable cable to connect the display unit to the interface of the printer.
Faultless operation requires an adequate KERN interface cable.
•
Communication parameters (baud rate, bits and parity) of display unit and
printer must match.
17.1 Technical data
Baud rate 4800/9600/19200/38400/57600/115200 selectable
Parity None, paired, unpaired
Transfer modes
•
Manually after pressing the PRINT key
•
Automatically according to stability display
•
Continuously, according to setting
•
On request by external device
(remote control commands)
92 AEJ-C/ AEJ-C/AES-C/PLJ-C-BA-e-1513