KERN PLJ-C, Operating Instruction

Page: 183 / 359

13.2 Weighing with tolerance range
For weighing with tolerance ranges you can enter individual upper and lower limits.
For tolerance controls such as dosaging, apportioning or sorting the scale will display
violated upper or lower limits and show the tolerance tag.
The symbol in the upper part of the display shows whether the load is within the two
tolerance limits.
The tolerance marker is only in operation during operating mode tolerance weighing;
it is otherwise not visible.
The tolerance marker provides the following information:
1 Goods to be weighed below tolerance limit
2
Goods to be weighed within tolerance
range
3 Goods to be weighed above tolerance limit
4 Bar graph
5 Tolerance display
AEJ-C/AES-C/PLJ-C-BA-e-1513 63