PLJ-GM-BA-e-1614
50
9.5 Communication protocol / remote control commands
Table 1:
Instruction list for RS232 interface
Instruction:
Meaning of Instruction:
Z
Set weight display at zero
T
Taring
S
Send stable weighing value in standard weighing unit
SI
Send weighing value immediately in standard weighing unit
SU
Send stable weighing value in current weighing value
SUI
Send weighing value immediately in current weighing unit
C1
Turn on continuous transmission in standard weighing unit
C0
Turn off continuous transmission in standard weighing unit
CU1
Turn on continuous transmission in current weighing unit
CO1
Turn off continuous transmission in current weighing unit
PC
Send all implemented instructions
Complete each instruction with
CR LF
.
9.5.1 Response messages from balance
Response message of balance after instruction was sent:
XX_
Instruction:
XX_A CR LF
Instruction accepted; will be executed
XX_D CR LF
Instruction complete (appears after XX_A only)
XX_ I CR LF
Instruction received; impossible to carry out
XX_^ CR LF
Instruction received but
time overflow error
occurred
XX_v CR LF
Instruction received, but insufficient load
XX_E CR LF
Error during execution, timeout for stable weighing value
exceeded
