KEPCO KLP 10-150-1.2K, User Manual

Page: 62 / 84

3-22
KLP031308
The KLP Instrument Home page identifies the unit which has been accessed, including Manu-
facturer, Instrument, Description, Serial Number, Calibration Date, LXI Software Revision, LXI
Class, LXI Version, Hostname, MAC Address and TCP/IP Address. Click the HELP box at the
left of the screen for detailed explanations of each. These parameters can not be changed by
the user. Fault alerts are not available from this page
Clicking the ID INSTRUMENT box at the left of the screen, causes the physical front panel LAN
indicator on the selected unit to blink, allowing visual confirmation as to which unit is selected.
This is especially important if more than one unit is found on the LAN.
3.3.6.3 INSTRUMENT CONFIGURATION USING WEB INTERFACE [-1.2K MODELS ONLY]
Click on CONFIGURE INSTRUMENT at the left to view the INSTRUMENT Configuration page
(Figure 3-5). The parameters that can be configured from this page are arranged in two groups.
The top group requires the unit password to change the parameter and includes:
• Whether the polarity of the Remote Inhibit signal is active (inhibit) for low or high (see
PAR. 3.2.13.5.1 for details).
• How the unit recovers from faults (see PAR. 3.2.13.5.2 for details).
The second group does not require a password, and includes
• GPIB address.
• Quick boot (see PAR. 3.2.13.4 for details).
• Assignment of the internal relay (see PAR. 3.2.13.3 for details).
FIGURE 3-5. WEB INTERFACE CONFIGURE INSTRUMENT PAGE