manualshive.com logo in svg

Kenwood TM-G707, Instruction Manual, Page: 62 / 84

Share
Download
Kenwood TM-G707 Instruction Manual Download Page 62

56

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

DISPLAY DIMMER

■

Manual Dimmer Change

You can manually change the display illumination to
suit the lighting conditions where you are operating.

Press 

[DIM]

 to select from 5 levels, including OFF.

Note:

  Selecting OFF automatically switches Auto Dimmer Change

ON.

■

Auto Dimmer Change

This function increases the display intensity one step
brighter for approximately 5 seconds when you press
a front panel button or Mic key, or turn the 

Tuning

control.  No change occurs if you have selected the
brightest level.

1

Press 

[MNU]

 to enter Menu mode.

2

Select Menu No. 2 (A.DIM).

3

Press 

[OK]

, then turn the 

Tuning

 control to switch

the function ON (or OFF).

4

Press

 [OK]

 again to complete the setting and exit

Menu mode.

BEEP VOLUME CHANGE

The transceiver beeps each time you press a front panel
button or Mic key.  You can change the beep volume or
turn it off.

1

Press 

[MNU]

 to enter Menu mode.

2

Select Menu No. 16 (BEEP).

3

Press 

[OK]

, then turn the 

Tuning

 control to select the

volume from levels 1 to 7 and OFF.

• The default is level 5.

4

Press 

[OK]

 again to complete the setting and exit

Menu mode.

DISPLAY DEMONSTRATION

By initiating this function, various pre-programmed
displays appear.  You still can normally use the
transceiver in this mode.  Pressing a front panel button
or Mic key, or turning the 

Tuning

 control restores the

operating display immediately.  If there is no button/key
entry or 

Tuning

 control adjustment for approximately

12 seconds, the transceiver reverts back to
Demonstration mode.

Press 

[F]

+[ ]

 to switch the function ON (or OFF).

Summary of Contents for TM-G707





















































































Reviews:

No comments