TK-5210
(
G
)
4
1. Modes
User mode
Panel test mode *1
Panel tuning mode *1
Data programming mode
PC test mode
PC tuning mode
Clone mode *1
Self programming mode *1
Firmware version information *1
Clock adjustment mode *1
Transceiver information mode *1
PC mode
Firmware
programming mode
Mode
Function
User mode
For normal use.
Panel test mode *1
Used by the dealer to check the fundamen-
tal characteristics.
Panel tuning mode
*1
Used by the dealer to tune the transceiver.
PC mode
Used for communication between the trans-
ceiver and PC.
Data programming
mode
Used to read and write frequency data and
other features to and from the transceiver.
PC test mode
Used to check the transceiver using the PC.
This feature is included in the FPU.
See panel tuning.
Firmware
programming
mode
Used when changing the main program of
the fl ash memory.
Clone mode *1
Used to transfer programming data from
one transceiver to another.
Self programming
mode *1
Frequency, signaling and features write to
the transceiver.
Firmware version
information *1
Used to confi rm the internal fi rmware ver-
sion.
Clock adjustment
mode *1
Used by the dealer to adjust date and time.
Transceiver
information mode
*1
Used to confi rm the transceiver fi rmware
version.
*1: K2, K3 and K7 models only
2. How to Enter Each Mode
Mode
Operation
User mode
Power ON
Panel test mode *2
Press and hold the [Side3] and [PTT] keys
while turning the transceiver power ON and
then release the [PTT] key fi rst.
PC mode
Received commands from PC.
Panel tuning mode
*2
Press the [Side3] key, in Panel test mode.
Firmware
programming
mode
Press and hold the [Side3] and [PTT] keys
while turning the transceiver power ON and
then release the [Side3] key fi rst.
Clone mode *2
Press and hold the [Side2] and [PTT] keys
while turning the transceiver power ON and
then release the [Side2] key fi rst.
Self programming
mode *2
Press and hold the [Side2] and [PTT] keys
while turning the transceiver power ON and
then release the [PTT] key fi rst.
And the “INPUT PASSWORD” is displayed,
then release the [Side2] key.
Firmware version
information *2
Press and hold the [Side3] key while turning
the transceiver power ON.
Clock adjustment
mode *2
Press and hold the [Orange] and [PTT] keys
while turning the transceiver power ON and
then release the [Orange] key fi rst.
Transceiver
information mode
*2
Press and hold the [Side1] and [PTT] keys
while turning the transceiver power ON and
then release the [PTT] key fi rst.
*2: K2, K3 and K7 models only
3. Panel Test Mode
(K2, K3 and K7 models only)
Setting method refer to ADJUSTMENT.
4. Panel Tuning Mode
(K2, K3 and K7 models only)
Setting method refer to ADJUSTMENT.
REALIGNMENT
