![background image](http://html.mh-extra.com/html/kenwood/tk-5210/tk-5210_service-manual_191525016.webp)
TK-5210
(
G
)
16
DISASSEMBLY FOR REPAIR
Installation Procedure During Parts
Replacement
■
Attaching the Sheet (G10-1338-04, J99-0383-14)
to the Front Case Speaker and Installation of the
Packing (G53-1633-04)
1. Attach a new fiber sheet
q
(G10-1338-04) so that its
convex fi ts the hollow of the front case
w
.
2. Attach a new pressure sensitive adhesive sheet
e
(J99-
0383-14) so that its convex fi ts the hollow of the front
case
r
.
3. Remove the separation sheet from the pressure sensi-
tive adhesive sheet with a pair of tweezers
t
.
4. Fit the packing
y
(G53-1633-04) into the front case
speaker.
Note:
Fit the packing into the hollow of the case so that the
two low-height places in the convex of the packing are
positioned on the lower side
u
.
B
.
;
=
:
>
@
5. Verify that the packing does not ride on the rib of the
case.
■
Installing a new LCD ASSY to the holder
(K2, K3 and K7 models only)
1. Remove the separation paper (brown) from the new
sheet
q
w
, and attach the sheet to the surface of the
holder
e
.
2. Remove the protection sheets attached to both sides of
the new LCD ASSY.
3. Remove the separation paper (white) from the sheet in
step 1
r
, then attach the LCD ASSY
t
to the sheet.
4. Attach two pieces of double-sided adhesive tape
y
to
the back of the holder and remove the separation paper.
5. Remove the protection sheet (transparent) attached to
one side of the new fi lter
u
i
and remove the protec-
tion sheet (yellow) from the other side
o
.
6. Attach the fi lter from step 5 to the back of the holder.
7. Attach the new cushion
!0
so that it fi ts to the corner of
the holder convex.
:
:
@
.
.
;
B
>
B
B
2
8
B
=
=