TK-2317
18
6. Assembling the Battery Release Lever
1. Place the lever
b
onto the stopper
a
.
2. Place the thick spring
c
onto the lever.
3. Hook the right and left ends of the thin spring
d
onto the
tabs of the stopper, then place the thin spring onto the
lever
e
.
4. Slide the shaft through the hole of the stopper and lever
f
.
7. Attaching the Positive Terminal to the
Chassis
Always attach the positive terminal to the chassis, using
the following procedures, before mounting the TX-RX unit
onto the chassis.
1. Remove the holder assembly
b
from the packing
a
of
the positive terminal.
2. Mount the packing of the positive terminal into the chas-
sis hole
c
.
3. Mount the holder assembly into the packing of the posi-
tive terminal
d
.
DISASSEMBLY FOR REPAIR /
维修拆卸
a
b
c
d
e
f
a
c
d
b
6. 电池分离拨杆的组装方法
1. 请把拨杆
b
置于止动器
a
的上面。
2. 请把粗弹簧
c
置于拨杆的上面。
3. 请把细弹簧置于拨杆上面，并让细弹簧
d
的左右端置于
止动器的两个卡头内。
e
4. 滑动轴穿过止动器和拨杆的孔。
f
7. 把正极端子安装到机架
把收发单元组装到机架之前，必须按照以下的顺序把电池
正极端子安装到机架。
1. 从正极端子的垫片
a
上取下机架
b
。
2. 把正极端子的垫片安装到机架孔上。
c
3. 把支架安装到正极端子的垫片上。
d
