Kenwood NXR-5700, Service Manual

Page: 49 / 122

(No.RA033<Rev.001>)1-49
6. Open
Squelch
Adjust
[Analog
Narrow] FPU Test mode
1) Adjust Item: [Open Squelch
(Analog Narrow)]
Connect the SSG to the RX
ANT.
SSG setting
Frequency: [Low], [Low’], [Cen-
ter], [High’], [High]
Output: 12dB SINAD level -1dB
MOD: 1.0kHz
DEV: ±1.5kHz SSG
Audio ana-
lyzer
Oscillo-
scope Rear RX ANT PC
ADJ Write the fixed value"43"
2) SSG output: OFF Check The squelch shall be closed.
7. Open
Squelch
Adjust
[NXDN
Very Nar-
row] FPU Test mode
1) Adjust Item: [Open Squelch
(NXDN Very Narrow)]
Connect the SSG to the RX
ANT.
SSG setting
Frequency: [Low], [Low’], [Cen-
ter], [High’], [High]
Output: 12dB SINAD level of
Analog Narrow -6dB
MOD: OFF PC
ADJ Press [Apply] button to store
the adjustment value.
8. Tight
Squelch
Adjust
[Analog
Wide] FPU Test mode
1) Adjust Item: [Tight Squelch
(Analog Wide)]
Connect the SSG to the RX
ANT.
SSG setting
Frequency: [Low], [Low’], [Cen-
ter], [High’], [High]
Output: 12dB SINAD level +8dB
MOD: 1.0kHz
DEV: ±3.0kHz PC
ADJ Press [Apply] button to store
the adjustment value.
Note:
Write the fixed value of
“200” when the adjust-
ment value is “199” or
less.
2) SSG output: OFF Check The squelch shall be closed.
9. Tight
Squelch
Adjust
[Analog
Narrow] FPU Test mode
1) Adjust Item [Tight Squelch
(Analog Narrow)]
Connect the SSG to the RX
ANT.
SSG setting
Frequency: [Low], [Low’], [Cen-
ter], [High’], [High]
Output: 12dB SINAD level +8dB
MOD: 1.0kHz
DEV: ±1.5kHz PC
ADJ Write the fixed value “190”
2) SSG output: OFF Check The squelch shall be closed.
Item Condition
Measurement Adjustment
Specifications / Remarks
Test-
equipment
Unit
Terminal Unit
Parts Method