Kenwood NXR-5700, Service Manual

Page: 41 / 122

(No.RA033<Rev.001>)1-41
2.8.16 LAN Connector (RJ-45)
SECTION 3
DISASSEMBLY
This service manual does not describe DISASSEMBLY.
Pin
Num
Pin
Name
I/O Signal
Type
Modifi-
cation
Description/
port Type
Spec and Condition Min Typ Max Unit Note
1 TD+ O Analog No TX 100Base-TX V conform to
IEEE802.3
+Vout@100ohm 0.95 - 1.05
-Vout@100ohm -1.05 - -0.95
Data rate - 125.0 - Mbps
10Base-TX V
Vout@100ohm 2.2 2.5 2.8
Data rate - 10.0 - Mbps
Output Impedance - 100.0 - ohm
2 TD- O Analog No TX Signal - 100Base-TX V conform to
IEEE802.3
+Vout@100ohm 0.95 - 1.05
-Vout@100ohm -1.05 - -0.95
Data rate - 125.0 - Mbps
10Base-TX V
Vout@100ohm 2.2 2.5 2.8
Data rate - 10.0 - Mbps
Output Impedance - 100.0 - ohm
3 RD+ I Analog No RX Input Impedance - 100 - ohm conform to
IEEE802.3
4 NC - - No - - - - - - -
5 NC - - No - - - - - - -
6 RD- I Analog No RX Signal - Input Impedance - 100 - ohm conform to
IEEE802.3
7 NC - - No - - - - - - -
8 NC - - No - - - - - - -