Off-hook Voting
Supported Models: Mobile
Off-hook Voting
is the function to initiate Voting depending on the status of microphone, either on-hook or off-hook.
The transceiver behaves as follows according to the configuration in
Off-hook Voting
:
Table 1-17 Off-hook Voting
Configuration
Description
Enabled
The transceiver can initiate Voting while the microphone is in either the on-hook state or off-hook
state.
Even if the microphone changes from the on-hook state to off-hook state during Voting, Voting
does not pause.
Disabled
The transceiver can initiate Voting if the microphone is in the on-hook state. The transceiver cannot
initiate Voting if the microphone is in the off-hook state. If the microphone changes from the on-
hook state to off-hook state during Voting, Voting pauses on the Revert Channel.
Even if the microphone changes from the on-hook state to off-hook state while Voting pauses, the
channel is not changed. When the microphone goes to on-hook state, the transceiver resumes
Voting.
Configuration using KPG-D1/ D1N
Configuring
Off-hook Voting
(
Transceiver Settings > Scan > Scan Information > P25 Voting)
1 P25 CONVENTIONAL SYSTEM
1.13 Migrating Automatically to the Site Providing Better Radio Environment (P25 Voting)
P25 FUNC (K)/Ver 2.20
60
