Auto Reset Timer
Auto Reset Timer
is the length of time from when the received 2-tone code matches the 2-tone code preconfigured for the
transceiver until the matching state is automatically reset.
Auto Reset Timer
is configured using KPG-D1/ D1N. Also, how the transceiver behaves after the length of time configured
in
Auto Reset Timer
elapses can be configured.
Table 1-13 Auto Reset Timer
Configuration
Description
Auto Reset
Timer
Off
Auto Reset Timer
does not function.
0 sec to 300 sec
After the configured time elapses, the matching state of the 2-tone code is
automatically reset.
LED
If this function is enabled, the flashing LED for the
Selective Call Alert LED
turns off
when the length of time configured in
Auto Reset Timer
elapses.
Alert
If this function is enabled, the intermittently emitted Alert Tone stops when the length
of time configured in
Auto Reset Timer
elapses.
Monitor
If this function is enabled, the matching state of the 2-tone code is reset when the
length of time configured in
Auto Reset Timer
elapses.
Clear to Transpond
Clear to Transpond
is the function that allows the transceiver to wait for the Transpond until the channel becomes available
if the channel is occupied by other users when the transceiver attempts to initiate the Transpond.
Selective Call Alert LED
Selective Call Alert LED
is the function to make the LED flash when the transceiver receives a 2-tone code.
A user can notice by the LED that the transceiver is receiving a call.
Note
The matching state of 2-tone code is reset on the following conditions. Also, the Transpond is reset on the following
conditions. The Transpond is suspended if transmission is disabled by
Clear to Transpond
.
1 P25 CONVENTIONAL SYSTEM
1.7 Using 2-tone to Initiate an Individual Call
P25 FUNC (K)/Ver 2.20
38
