manualshive.com logo in svg

Kenwood NX-5000 series, Manual

Share
Download
Kenwood NX-5000 series Manual Download Page 117

2.7

Making a Group Call

Group Call is the function used to make a voice call by calling all transceivers configured as group members.
Specifying a Talkgroup ID enables a call to all transceivers having the same Talkgroup ID.

Initiating a Group Call

Selecting the channel configured for the Talkgroup to call by pressing one of the following keys or operating the 

Selector

,

and then pressing the 

PTT

 switch, a Group Call can be initiated.

0

Channel Up

 key

0

Channel Down

 key

0

Channel Up/Down (Selector)

0

Channel Select (Selector)

Note

If 

Receive Only TG/AG

 of the selected channel is disabled, the transceiver can call or wait for a call with a Talkgroup ID

configured for the channel. If 

Receive Only TG/AG

 is enabled, the transceiver can only wait for a call with a Talkgroup

ID configured for this channel, and the transceiver cannot call with the Talkgroup ID.

Operating the transceiver

1

Selecting the channel configured for the Talkgroup to call by pressing one of the following keys or operating
the 

Selector

.

0

Channel Up

 key

0

Channel Down

 key

0

Channel Up/Down (Selector)

0

Channel Select (Selector)

2

Press the 

PTT

 switch.

The transceiver initiates a Group Call.

Note

0

If 

Receive Only TG/AG

 is enabled, a Warning Tone A (continuous beep)

sounds from the transceiver while the 

PTT

 switch is pressed and held.

0

If the time configured in 

PTT Warning Time

 elapses while the 

PTT

switch is being pressed and held, a Warning Tone A (continuous beep)
sounds from the transceiver.

Menu

Zone+

Z o n e   1

T a l k g r o u p   1

12 : 34

A

M

C a l l i n g

Menu

Zone+

Z o n e   1

T a l k g r o u p   1

12 : 34

A

M

2 P25 TRUNKING SYSTEM

2.7 Making a Group Call

P25 FUNC (K)/Ver 2.20

97

CONTENTS

INDEX

Summary of Contents for NX-5000 series









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands