manualshive.com logo in svg

Kenwood NX-5000 series, Manual

Share
Download
Kenwood NX-5000 series Manual Download Page 44

Individual ID List

If making Individual Calls, the desired Individual IDs need to be preconfigured in the transceiver using KPG-D1/ D1N prior
to use of the transceiver. A maximum of 1500 Individual IDs can be configured for Individual ID List. A user can store a
maximum of 32 Individual IDs in the Individual ID List.

Table 1-7 Individual ID List

Configuration

Description

ID

An Individual ID can be configured in the range between “000001” and “FFFFFF” (hexadecimal),
or between 1 and 16777215 (decimal).

ID Name

A name with a maximum of 14 characters can be configured for an Individual ID.
If only an Individual ID appears on the transceiver display, it may be difficult for a user to quickly
identify the caller. If an identifiable name or common name appears on the transceiver display,
the user can easily recognize these with a glance.
If the 

ID Name

 of the calling transceiver is configured in the Individual ID List, the 

ID Name

 of the

calling transceiver appears on the transceiver display when a call is received. If the 

ID

 is configured

and the 

ID Name

 is not configured in the Individual ID List, the Individual ID List number of the

transceiver appears on the transceiver display. If the 

ID

 is not configured in the Individual ID List,

the Individual ID of the calling transceiver appears on the transceiver display.

ID Mode

Whether to permit or prohibit transmission to the target transceiver can be configured.
An ID with “Receive Only” configured in 

ID Mode

 does not appear on the ID selection screen in

Individual Call Mode, and a user cannot select the ID in Individual Call Mode.
If the transceiver receives a call from a caller having an ID with “Receive Only” configured in 

ID

Mode

, the ID Name of the calling transceiver appears on the transceiver display. In this case, a

user cannot initiate a call to the calling transceiver even if the user attempts to respond by pressing
the 

PTT

 switch.

Individual (Alert Tone)

The type of tone sounding from the transceiver can be configured for an Individual Call from the
Individual IDs registered in the Individual ID List.

Individual (Alert LED
Color)

*1

The color of flashing LED can be configured for an Individual Call from the Individual IDs registered
in the Individual ID List.

Encryption

How Encryption is used when the transceiver transmits on a P25 digital channel can be configured.
(Refer to 

COMMUNICATION SECURITY

.)

Clear:

The transceiver always sends communication data without encrypting the data. Even if
Encryption is enabled by operating the transceiver, the transceiver sends communication data
without encryption.

Secure:

The transceiver always encrypts and sends communication data. Even if Encryption is disabled
by operating the transceiver, the transceiver encrypts and sends communication data.

Select:

The transceiver encrypts and sends communication data if Encryption is enabled. The
transceiver sends communication data without encrypting the data if Encryption is disabled.

Note

The status of Encryption can be toggled between enabled or disabled by using the 

Encryption

key or 

Menu

 key. (Refer to 

Toggling the Encryption during Transmission between Enabled and

Disabled

.)

Multi-key List No.

Encryption Key to be used by the transceiver to transmit using the Encryption function can be
configured by selecting from the Multi-key List. (Refer to 

Multi-key List

.)

EKR List No.

When using the OTAR function, the Encryption Key to be used in combination with an Individual
ID can be configured. (Refer to 

P25 OTAR

.)

1 P25 CONVENTIONAL SYSTEM

1.5 Making an Individual Call

P25 FUNC (K)/Ver 2.20

24

CONTENTS

INDEX

Summary of Contents for NX-5000 series









































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands