Kenwood NX-3720, Service Manual

Page: 34 / 210

1-34 (No.RA054<Rev.001>)
• LED indicator
Red LED Lights during transmission.
Green LED Lights when there is carrier.
• Sub LCD indicator
"Func" Appears at function on.
• LCD display in panel test mode
4.2.3 Frequency and Signaling
The transceiver has been adjusted for the frequencies shown in
the following table. When required, readjust them following the
adjustment procedure to obtain the frequencies you want in
actual operation.
(1) Test frequency
(2) Signaling
 Analog Type Signaling
[ ] External Speaker on/
off
On: icon appears
[ (AUX)] Compander on/off On: [ ] icon appears
[PTT] Transmit -
[0] to [9]
and
[#], [ ] Function off -
Button "Func" appears on the sub LCD display
Function Display
(Power ON)
Type
Frequency range
136~174MHz
(After 2sec.)
Temperature [
o
C]
Power
An : Analog narrow mode
Aw : Analog wide 5k mode
Nn : NXDN narrow mode
Nv : NXDN very narrow mode
D : DMR mode
Squelch level
(Analog mode only)
Sub LCD display
Main LCD display
Signaling
No.
Channel No.
CH RX (MHz) TX (MHz)
1 155.05000 155.10000
2 136.05000 136.10000
3 173.95000 173.90000
4 155.00000 155.00000
5 155.20000 155.20000
6 155.40000 155.40000
7~16 - -
No. RX TX
1 None None
2 None Square Wave
3 LTR Data LTR Data
4 QT:67.0Hz QT:67.0Hz
5 QT:151.4Hz QT:151.4Hz
6 QT:210.7Hz QT:210.7Hz
7 QT:254.1Hz QT:254.1Hz
8 DQT:D023N DQT:D023N
9 DQT:D754I DQT:D754I
10 DTMF Decode
(CODE: 159D) DTMF Encode
(CODE: 159D)
11 None DTMF Encode (CODE: 9)
12 2-tone Decode
(A: 304.7Hz, B: 3106.0Hz) 2-tone Encode (A: 304.7Hz,
B: 3106.0Hz)
13 Single Tone Decode
(979.9Hz) Single Tone Encode
(979.9Hz)
14 None Single Tone Encode
(1000Hz)
15 None MSK PN9
16 MSK Decode MSK Encode