Kenwood NX-3720 Service Manual Download Page 17 | Manualshive

Page: 17 / 210

background image

(No.RA054<Rev.001>)1-17

2.4.4 Transmitter System
2.4.4.1

Audio Band Circuit

The signal from microphone is amplified and converted to digital signal by IC607. IC607 includes AGC function.
Digital signal is transferred to IC404.

2.4.4.2

Baseband Circuit

The audio signal transferred from IC607 is processed at IC404.Voice signals of 300Hz or lower and frequencies of 3 kHz or higher are
cut off and an audio range 300Hz to 3 kHz is extracted. The audio signal is then pre-emphasized in FM mode and synthesized with
the signals, such as QT and DQT, as required, and is transferred to PLL Frequency Synthesizer block in IC302. The DTMF and MSK
baseband signals are also generated by IC404.
In Digital mode, the audio signal is converted to the 4-Level FSK baseband signal and is transferred to PLL Frequency Synthesizer
block in IC302.

2.4.4.3

Drive and Final amplifier

The RF signal from IC302 is amplified by pre-drive amplifier (IC202). The output of the pre-drive amplifier is amplified by the drive
amplifier (Q201) and RF Power module (IC201) to 50W [NX-3720H], 45W [NX-3820H], 25W [NX-3720, NX-3820] (5W when the power
is low). IC202 is MMIC.Q201 is MOS FET. The output of the final amplifier is then passed through the coupler, antenna switch (D205,
D206 and D207), harmonic filter (LPF) and applied to the antenna terminal.

2.4.4.4

APC circuit

The Automatic transmission power control (APC) circuit controls the transmitter output in adjusted value by monitoring it with a coupler.
RF detection and comparison functions are included in the power-control IC (IC205).
The power control IC output is given as a drive source of the RF power module’s gate (IC201), and completes APC feedback loop.
When a normal antenna load is connected, forward RF Power is detected by the coupler and direct in power-control IC (IC205).
Forward RF Power is converted into DC voltage in IC205 and compared with the SPC.
The output voltage goes through DC amp (IC203 2/2) to Drive amp (Q201) and RF Power module (IC201).
The voltage controls the gate bias voltage of Q201 and IC201, and keeps transmission output stable.

Fig.3 Drive and Final amplifier and APC circuit

2.4.5 PLL Frequency Synthesizer
2.4.5.1

TCXO (X401)

TCXO (X401) generates a reference frequency of 19.2MHz for the PLL frequency synthesizer. This reference signal is buffered by
Q401. And it is distributed to PLL (IC302).
The oscillation frequency is adjusted TCXO directly by controlled the D/A converter of FCNT.

IC302

Pre-Drive

IC202

Q201

Drive

Gate Bias 1

Gate Bias 2

IC201

Final

SPC

IC205

Coupler

PA

CTRL

DC

AMP

IC203

DC

AMP

REV

DET

REV

D204

ANT

SW

D205,D206
D207
D208,D209

ANT
LPF

«
...
15
16
17
18
19
...
»

Summary of Contents for NX-3720



















































































































































































































Reviews:

No comments

Related manuals for NX-3720

Brand: u-blox Pages: 2

Brand: Samsung Pages: 94

Brand: Transition Networks Pages: 1

Warrior HHMS-9XW08

Brand: Cervis Pages: 19

Brand: Lectrosonics Pages: 16

vigilantplant YTA70

Brand: YOKOGAWA Pages: 5

Brand: Icom Pages: 64

Brand: ASCOM Pages: 22

Brand: Xoro Pages: 84

Brand: E+E Elektronik Pages: 7

Brand: AMX Pages: 1

Brand: DRAKE Pages: 48

Portable Transducer

Brand: Humminbird Pages: 2

CentreCOM AT-280

Brand: Allied Telesis Pages: 4

Brand: Crestron Pages: 10

Brand: Topfield Pages: 16

SEL2641 R433-Z2

Brand: Erone Pages: 2

EDACS 19D902120G1

Brand: Ericsson Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands