Kenwood NX-3720, Service Manual

Page: 30 / 210

1-30 (No.RA054<Rev.001>)
SECTION 3
DISASSEMBLY
3.1 Disassembly Procedure
(1) Remove the cabinet, top packing and shielding plate of the
transceiver.
(2) To remove the panel assembly, first turn the transceiver
upside down.
Then, insert a flat-head screwdriver into the holes of the
chassis and tilt it in the direction as shown by the arrow.
(3) Disconnect the flat cable from connector of the panel
assembly.
(4) Remove the speaker lead from the holder hook.<1>
Remove the speaker connector from the display unit
connector.<2>
Insert a flat-head screwdriver at the stamp position (arrow
mark) in the speaker holder.<3>
Tilt the screwdriver in the figure direction <4>, then remove
the speaker holder from the front panel.
Cabinet
Holes
Panel assembly
Flat cable
<1>Holder hook <1>Holder hook
<2>Speaker connector <2>Speaker connector
<3> <3> <3>
Speaker holder Speaker holder
<4> <4>