Kenwood NX-3220 E Service Manual Download Page 8

Page: 8 / 204

1-8 (No.RA053<Rev.001>)

2.2

REALIGNMENT

2.2.1 Modes

*1:In order to use the Front panel programming mode, it is
necessary to purchase the "Front panel program" feature
option.

2.2.2 How to Enter Each Mode

*2 K2, K3, E and E2 types only.
*3 There is the two or three as how to enter.

2.2.3 Panel Test Mode (K2, K3, E and E2 types only)

Setting method refer to ADJUSTMENT.

2.2.4 Panel Tuning Mode (K2, K3, E and E2 types only)

Setting method refer to ADJUSTMENT.

Mode

Function

User mode

For normal use.

Panel test mode

Used by the dealer to check the
fundamental characteristics.

Panel tuning mode Used by the dealer to tune the transceiver.
PC mode

Used for communication between the
transceiver and PC.

Data programming
mode

Used to read and write frequency data and
other features to and from the transceiver.

PC test mode

Used to check the transceiver using the
PC. This feature is included in the FPU.

Firmware
programming
mode

Used when changing the main program of
the flash memory.

Clone mode

Used to transfer programming data from
one transceiver to another.

Front panel
programming
mode

Frequency, signaling and features write to
the transceiver.

Transceiver
information mode

Used to confirm the transceiver firmware
version, Encryption Library version.

User mode

Data programming mode

PC tuning mode

Transceiver information mode

PC mode

Panel tuning mode

Panel test mode

Firmware programming mode

Clone mode

Front panel programming mode*1

PC test mode

Mode

Operation

User mode

Power ON

Panel test mode*2,*3

• [

] + Power ON

• [ ] + Power ON *3
Select the “Panel Test” using the [



] /

[



] button.

Press the [ ] button.

PC mode

Received commands from PC

Panel tuning mode *2

[Panel test mode] + [ ]

Firmware programming
mode*3

• [AUX (Orange)] + Power ON
• [ ] + Power ON *2
Select the “Firmware Prog” using the
[



] / [



] button.

Press the [ ] button.
• If Write is performed by KFL,

Firmware programming mode will
start automatically.

Clone mode*2,*3

• [ ] + Power ON
• [ ] + Power ON
Select the “Clone” using the [



] / [



]

button.
Press the [ ] button.

Front panel
programming
mode*2,*3

• Press the PF button to which Front

panel programming mode is set
during the user mode.

• Press the [ ] button and enter the

Menu mode.

Select the any icon assigned the Front
panel programming mode using the
[



] / [



] button.

Press [ ] button.
Select the “Panel Program” using the
[



] / [



] button.

Press the [ ] button.

Transceiver
information mode*2,*3

• [Side 1] + Power ON
• [ ] + Power ON
Select the “Transceiver Info” using the
[



] / [



] button.

Press the [ ] button.

Summary of Contents for NX-3220 E













































































































































































































Search results

Summary of Contents for NX-3220 E

Reviews:

Related manuals for NX-3220 E

Brands by name

Popular brands

Kenwood NX-3220 E, Service Manual

Search results

Summary of Contents for NX-3220 E

Reviews:

Related manuals for NX-3220 E

Brands by name

Popular brands