l
This appliance shall not be used by children. Keep the
appliance and its cord out of reach of children.
l
Misuse of your appliance can result in injury.
l
Do not let the cord touch hot surfaces or hang down where a
child could grab it.
l
Appliances can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and if they
understand the hazards involved.
l
Only use the appliance for its intended domestic use.
Kenwood will not accept any liability if the appliance is subject
to improper use, or failure to comply with these instructions.
3
before plugging in
l
Make sure your electricity supply is the same as
the one shown on the underside of the appliance.
l
WARNING: THIS APPLIANCE MUST BE
EARTHED.
l
This appliance conforms to EC Regulation
1935/2004 on materials and articles intended to
come into contact with food.
before using for the first time
Wash the parts: see ‘care and cleaning’.
key
1
pusher
2
feed tube lid latch
3
lid with feed tubes
4
scroll
5
filter basket (red dot)
6
rotating wiper holder
7
juicing bowl
8
pulp spout
9
pulp container
bk
power unit
bl
juice spout
bm
anti-drip stopper
bn
On/Off/Reverse switch
bo
juice jug
bp
cleaning brush
bq
sorbet attachment (if supplied)
br
smoothie attachment (white dot) (if supplied)
using your juicer
1 Fit the pulp stopper
(A)
into the opening on the
underside of the juicing bowl
7
and push in
until secure
(B)
.
2 Fit the juicing bowl
7
to the power unit by
positioning the juice spout to the front
(C).
3 Place the filter basket
5
into the wiper holder
6
(D)
.
4 Lower the wiper holder assembly into the juicing
bowl and align the red dot on the filter basket
with the red dot on the bowl
(E)
. Ensure that
the filter basket is locked into place.
5 Place the scroll
4
into the filter basket, push
down and turn slightly to secure
(F)
.
Note:
the lid cannot be fitted if the scroll is
not fully pushed down.
6 Fit the lid
3
onto the bowl by aligning the red
dot on the lid with the red dot on the bowl
(G)
.
Then turn to lock in a clockwise direction
(H)
until the
red dot graphic
down arrow graphic
white arrow graphic
triangles graphic
reverse graphic
on graphic
off graphic
on the lid aligns with the red dot on
the bowl
(I)
and the
red dot graphic
down arrow graphic
white arrow graphic
triangles graphic
reverse graphic
on graphic
off graphic
aligns with the
red dot graphic
down arrow graphic
white arrow graphic
triangles graphic
reverse graphic
on graphic
off graphic
on
top of the power unit
(J)
.
7 Place the pulp container
9
under the pulp
spout
8
and place the juice jug
bo
under the
juice spout
bl
. Ensure the anti-drip stopper
bm
if fitted is in the open position
(K)
before juicing.
l
The anti-drip stopper can be left in the closed
position if you want to mix different fruits and
vegetables. Do not allow the juice to exceed the
maximum capacity marked on the bowl when
operating the juicer with the stopper closed as
the juice may overflow.
