Kenwood HM-582 Instruction Manual Download

Page: 35 / 84

Recording on MD

Knowledge section

Preparation section

Application section

Basic section

The level for recording the digital input signal from an aux-
iliary source component such as a satellite tuner or MD re-
corder can be adjusted.

Blinks

Adjusting the recording level of digital input from the auxiliary source (AUX D. LEVEL)

Select the “MD” input.

Set the MONITOR mode to “ON”.

›

Press the menu/demo key

Rotate the volume/multi-control knob to select “AUX
D. LEVEL ?”, then press the set key.

Press the display key to display the level meter.

Adjust the recording level (-

∞

~ +12) by rotating the

volume/multi-control knob.

Press the set key to set the selection.

D.L

EVEL

D.L

EVEL

-12dB

TONE

A.P.S.

12:30PM

OPT

L
R

A.L

EVEL

A.L

EVEL

A.P.S.

12:30PM

L
R

The level for recording the analog input signal from an aux-
iliary source component such as cassette deck can be ad-
justed.

Blinks

Adjusting the recording level of analog input from the auxiliary source (AUX A. LEVEL)

Select the recording input signal (REC INPUT) as required.

›

Level value

Adjust so that these
segments light at times.

Press the menu/demo key.

Rotate the volume/multi-control knob to select
“MONITOR ?”, then press the set key.

Select “ON” by rotating the volume/multi-con-
trol knob, then press the set key.

Press the menu/demo key

Rotate the volume/multi-control knob to select
“AUX A. LEVEL ?”, then press the set key.

Press the display key to display the level meter.

Adjust the recording level (-4 ~ +3) by rotating the
volume/multi-control knob.

Press the set key to set the selection.

Summary of Contents for HM-582





















































































Search results

Summary of Contents for HM-582

Reviews:

Related manuals for HM-582

Brands by name

Popular brands

Kenwood HM-582, Instruction Manual

Search results

Summary of Contents for HM-582

Reviews:

Related manuals for HM-582

Brands by name

Popular brands