Kenwood HM-582 Instruction Manual Download

Page: 75 / 84

Timer operation

Knowledge section

Preparation section

Application section

Basic section

Contents

To cancel execution of a timer program (Remote control unit only)

To set the same timer program again (Remote control unit only)

Press the TIMER key repeatedly until “PROG.1” or
“PROG.2” appears.

Also prepare the disc and adjust the listening volume.

The reservation contents are held in memory.

Goes off

Lights

Press the TIMER key repeatedly until “PROG.1” or
“PROG.2” disappears.

Each press increases the set time by 10 minutes. The sleep
timer can be set up to about 90 minutes.

To cancel

The system has been set so that the LCD bright-
ness drops automatically during the sleep timer
operation. (Auto dimmer)

Turn the power OFF or press the SLEEP key until
the sleep time is cancelled.

Press the SLEEP key during CD or MD playback or
during radio reception.

The sleep timer is used to set the period after which the power will switch OFF automatically.

AU TO

FM P08
BAYERN 3

TONE

STEREO

A.P.S.

12:30PM

RDS

TIMER

AU TO

FM P08
BAYERN 3

A.P.S.

12:30PM

RDS

TONE
PROG

LEEP

IMER

5min

TRACK

TONE

12:30PM

SLEEP

LEEP

IMER

10min

TRACK

TONE

12:30PM

30 ....70

Cancel

The unit is turned OFF automatically after the set time has
elapsed.

Blinking starts when re-
maining time is 5 minutes
or less.

Note

After the timer has been set and power is off (timer standby), if there is a power failure or the power cord is unplugged from
and plugged again into the power outlet, the

/timer

indicator blinks in amber. In this case, set the clock again.

Be sure to adjust the clock before setting the timer.

Pressing the

SLEEP

key once allows you to check the

remaining time. When checking the remaining time, it can
be fine adjusted (in 1-minute steps) using the

VOLUME

keys on the remote control unit.

Sleep timer (SLEEP)

(Remote control unit only)

Summary of Contents for HM-582





















































































Search results

Summary of Contents for HM-582

Reviews:

Related manuals for HM-582

Brands by name

Popular brands

Kenwood HM-582, Instruction Manual

Search results

Summary of Contents for HM-582

Reviews:

Related manuals for HM-582

Brands by name

Popular brands